EE8401 - Electrical Machines - II - Notes - Unit-4 Two marks - EEE 4th Sem

Subject Name: Electrical Machines - II

Subject Code: EE8401

B.E. EEE Dept - semester 04

Anna University Regulation 2017 B.E. EEE Dept 4th semester EE8401(Electrical Machines - II) 2 marks for 4th unit is provided below. EE8401 all units 2 marks, Electrical Machines - II all units notes & syllabus are listed down for students to utilize it for scoring maximum marks with our study materials.

1.Give the functions performed by induction motor starter.

Answer

Apart from limiting the high starting current, starter in an induction motor also serves the functions like single phase prevention, prevention of low voltage operation, thermal shutdown, prevention from overloading etc.

2.State two advantages of speed control of IM by injecting an e.m.f. in the rotor circuit.

Answer

1. Smooth and wide range of speed control possible. 2. Design of rotary converter is independent of the speed control required. 3. If rotary converter is overexcited, power factor improvement is possible. 4. The design of the rotary converter is independent of the speed control required.

3.Name the type of starters used in 3 phase induction motors.

Answer

1. Stator resistance starter 2. Autotransformer starter 3. Star-delta starter 4. Rotor resistance starter 5. Direct on line starter

4.Write down the methods to control the speed of 3 phase induction motor from its rotor side.

Answer

From rotor side, it includes following methods : a. Adding external resistance in the rotor circuit. b. Cascade control. c. Injecting slip frequency voltage into the rotor circuit.

5.What is the disadvantage of rotor rheostat speed control method ?

Answer

i) Large power losses due to large I²R losses. ii) Efficiency is very low. iii) Cannot be used for squirrel cage motor. iv) Large speed changes not possible.

6.List the various methods speed control of 3 phase induction motor.

Answer

From stator side, it includes following methods : a. Supply frequency control to control Nₛ, called V/f control. b. Supply voltage control. c. Controlling number of stator poles to control Nₛ. d. Adding rheostats in stator circuit. From rotor side, it includes following methods : a. Adding external resistance in the rotor circuit. b. Cascade control. c. Injecting slip frequency voltage into the rotor circuit.

7.What will be the effect when stator voltage and frequency of an induction motor are reduced proportionally ?

Answer

When stator voltage and frequency is reduced proportionally then V/f ratio is maintained constant. Due to this, the air gap flux remains constant and speed of the induction motor gets reduced smoothly. The constant V/f ratio avoids the saturation of the cores resulting the sharp increase in the no load current. Thus smooth speed control of the induction motor is possible due to constant V/f ratio.

8.By which methods the stator poles can be controlled to control the speed of an induction motor ?

Answer

1. Consequent poles method 2. Multiple stator winding method 3. Pole amplitude modulation method.

9.What are the limitations of multiple stator winding speed control method ?

Answer

1. Can be applied to only squirrel cage motor. 2. Smooth speed control is not possible. Only step changes in speed are possible. 3. Two different stator windings are required to be wound which increases the cost of the motor. 4. Complicated from the design point of view.

10.What are the disadvantages of cascade control method ?

Answer

1. It requires two motors which makes the set expensive. 2. Smooth speed control is not possible. 3. Operation is complicated. 4. The starting torque is not sufficient to start the set. 5. Set cannot be operated if PA = PB.

11.Explain in brief the following term with respect to induction motor : a. Plugging b. Dynamic braking c. D.C. dynamic braking d. Regenerative braking.

Answer

a. The reversal of direction of rotation of motor is the main principle in plugging of motor. In case of an induction motor, it can be quickly stopped by interchanging any two stator leads. Due to this, the direction of rotating magnetic field gets reversed suddenly. This produces a torque in the reverse direction and the motor tries to rotate in opposite direction. Effectively the brakes are applied to the motor. b. In this method one supply line out of R, Y or B is disconnected from the supply. c. If the rotor speed is increased greater than the synchronous speed with the help of external device, it acts as an induction generator. It converts the input mechanical energy to an electrical energy which is given back to supply. It delivers active power to the 3 phase line. So rotor produces torque in opposite direction to achieve the braking. As the electrical energy is given back to the lines while braking, it is called regenerative braking. d. A quick stopping of an induction motor and its high inertia load can be achieved by connecting stator terminals to a dc. supply. Any two stator terminals can be connected to a d.c. supply and third terminal may be kept open or may be connected directly to other stator terminal. This is called d.c. dynamic braking.

12.State the drawback of a star-delta starter.

Answer

1. The factor by which voltage is reduced is fixed i.e. √3. 2. Only used for normally delta connected motors.

13.What are the advantages of rotor resistance speed control method ?

Answer

1. Wide range of speed control. 2. Starting torque gets improved. 3. Power factor gets improved. 4. Limits the starting current.

14.What are the different methods of speed control employed in three phase cage induction motor ?

Answer

The methods of speed control employed in three phase cage induction motor are, i) Supply frequency control to control Nₛ called V/f control. ii) Supply voltage control. iii) Controlling number of stator poles to control Nₛ. iv) Adding rheostats in stator circuit.

15.What is meant by slip power recovery scheme ?

Answer

In the rotor resistance speed control, the slip power in the rotor circuit is wasted as I²R losses. It is possible to recover the slip power from the rotor and feed back to the supply using static devices. Such a scheme of revecovering slip power from rotor is called slip power recovery scheme. The slip power recovered from rotor is either returned to the supply or used to drive on auxiliary motor which is mechanically coupled to the main induction motor.

16.Which is the cheapest method of starting a three phase induction motor ?

Answer

The star-delta starter is the cheapest method of starting induction motor.

17.While controlling the speed of an induction motor, how is super-synchronous speed achieved ?

Answer

It is possible by injecting slip frequency e.m.f. in the rotor circuit, in phase with the rotor induced e.m.f.

18.Explain plugging in three phase induction motor.

Answer

The reversal of direction of rotation of motor is the main principle in plugging of motor. In case of an induction motor, it can be quickly stopped by interchanging any two stator leads. Due to this, the direction of rotating magnetic field gets reversed suddenly. This produces a torque in the reverse direction and the motor tries to rotate in opposite direction. Effectively the brakes are applied to the motor. Thus during the plugging, the motor acts as a brake.

19.Define regenerative braking of induction motors.

Answer

If the rotor speed is increased greater than the synchronous speed with the help of external device, it acts as an induction generator. It converts the input mechanical energy to an electrical energy which is given back to supply. It delivers active power to the 3 phase line. The ϕ becomes greater than 90°. The power flow reverses hence rotor induced e.m.f. and rotor current also reverse. So rotor produces torque in opposite direction to achieve the braking. As the electrical energy is given back to the lines while braking, it is called regenerative braking.

20.When plugging is employed for stopping an induction motor, why is it necessary to disconnect it from supply when the speed reaches close to zero ?

Answer

If the induction motor is not disconnected from the supply after reaching zero speed in plugging, then motor will get accelerated in reverse direction and will start rotating in reverse direction. This may lead to damage of the load.

21.State the advantages of electrical braking.

Answer

1) It is easier and reliable 2) Smooth stop is possible 3) Brings motor to rest very quickly. 4) Levers, mechanical brakes, linings etc. are not required. So cheap. 5) Portion of the power can be supplied back to the supply network.

22.Under what condition, the slip in an induction motor is a) Negative b) Greater than one.

Answer

a) The slip of induction motor is negative when it runs more than the synchronous speed and acts as a generator. b) When the slip of induction motor is greater than one, it runs in a braking mode and it is rotated in opposite direction to the rotating magnetic field.

23.Why is rotor rheostat starter unsuited for a squirrel cage motor?

Answer

In rotor rheostat starter, resistance is connected in the rotor. But in squirrel cage rotor, the rotor is short circuited and there is no effect of external resistance added in the rotor. Hence rotor rheostat starter is unsuited for squirrel cage motor.

24.What are the conditions for regenerative braking of an induction motor to be possible ?

Answer

The regenerative braking is possible when i) The speed is greater than the synchronous speed. ii) The driving torque of the load is less than the maximum braking torque of the motor. iii) When there is load connected to the line which is in need of power more or equal to the regenerated power. iv) It is possible with pole change motor when the speed is changed from high to low.

25.What are the advantages of slip power scheme ?

Answer

The advantages of slip power schemes are high efficiency and low cost. It is preferred for large power fan and pump drives. The method is relatively simple and offers advantage of controlled starting torque.

Students searching keywords / Search terms:-

* EE8401 Electrical Machines - 2 - Two marks with answers
* EE8401 Electrical Machines - 2 all units Notes
* EE8401 Electrical Machines - 2 Syllabus
* EE8401 Electrical Machines - 2 Anna university notes
* Anna University Regulation 2017 EE8401 Electrical Machines - II Notes
* Regulation 2017 EE8401 Electrical Machines - 2 All units notes
* Regulation 2017 EE8401 Electrical Machines - 2 All units two marks notes
* Regulation 2017 EE8401 Electrical Machines - 2 Part-A 2 Marks with answers
* EE8401 unit 1 two marks
* EE8401 unit 2 two marks
* EE8401 unit 3 two marks
* EE8401 unit 4 two marks
* EE8401 unit 5 two marks
* EE8401 All units notes
* Anna University Regulation 2017 two marks with answers
* Anna University Regulation 2017 notes