EE8601 - SOLID STATE DRIVES (Syllabus) 2017-regulation Anna University
EE8601 - SOLID STATE DRIVES (Syllabus) 2017-regulation Anna University
Anna University Regulation 2017 EE8601 syllabus is provided below. Solid State Drives all units Syllabus, all units notes , all units 2 marks are provided below for students to utilize it for scoring maximum marks with our study materials.
EE8601 |
SOLID STATE DRIVES |
LPTC |
---|
3003
OBJECTIVES: To impart knowledge on the following Topics
• Steady state operation and transient dynamics of a motor load system.
• Analyze the operation of the converter/chopper fed dc drive, both qualitatively and quantitatively.
• Operation and performance of AC motor drives.
• Analyze and design the current and speed controllers for a closed loop solid state DC motor drive.
• Analyze the operation of the converter/chopper fed dc drive, both qualitatively and quantitatively.
• Operation and performance of AC motor drives.
• Analyze and design the current and speed controllers for a closed loop solid state DC motor drive.
UNIT I |
DRIVE CHARACTERISTICS |
9 |
---|
Electric drive – Equations governing motor load dynamics – steady state stability – multi quadrant Dynamics: acceleration, deceleration, starting & stopping – typical load torque characteristics – Selection of motor.
UNIT II |
CONVERTER / CHOPPER FED DC MOTOR DRIVE |
9 |
---|
Steady state analysis of the single and three phase converter fed separately excited DC motor drive– continuous conduction – Time ratio and current limit control – 4 quadrant operation of converter / chopper fed drive-Applications.
UNIT III |
INDUCTION MOTOR DRIVES |
9 |
---|
Stator voltage control–V/f control– Rotor Resistance control-qualitative treatment of slip power recovery drives-closed loop control–– vector control- Applications.
UNIT IV |
SYNCHRONOUS MOTOR DRIVES |
9 |
---|
V/f control and self-control of synchronous motor: Margin angle control and power factor control- Three phase voltage/current source fed synchronous motor- Applications.
UNIT V |
DESIGN OF CONTROLLERS FOR DRIVES |
9 |
---|
Transfer function for DC motor / load and converter – closed loop control with Current and speed feedback–armature voltage control and field weakening mode – Design of controllers; current controller and speed controller- converter selection and characteristics.
TOTAL: 45 PERIODS
OUTCOMES:
• Ability to understand and suggest a converter for solid state drive.
• Ability to select suitability drive for the given application.
• Ability to study about the steady state operation and transient dynamics of a motor load system.
• Ability to analyze the operation of the converter/chopper fed dc drive.
• Ability to analyze the operation and performance of AC motor drives.
• Ability to analyze and design the current and speed controllers for a closed loop solid state DC motor drive.
• Ability to select suitability drive for the given application.
• Ability to study about the steady state operation and transient dynamics of a motor load system.
• Ability to analyze the operation of the converter/chopper fed dc drive.
• Ability to analyze the operation and performance of AC motor drives.
• Ability to analyze and design the current and speed controllers for a closed loop solid state DC motor drive.
TEXT BOOKS:
1. Gopal K.Dubey, Fundamentals of Electrical Drives, Narosa Publishing House, 1992.
2. Bimal K.Bose. Modern Power Electronics and AC Drives, Pearson Education, 2002.
3. R.Krishnan, Electric Motor & Drives: Modeling, Analysis and Control, Pearson, 2001.
2. Bimal K.Bose. Modern Power Electronics and AC Drives, Pearson Education, 2002.
3. R.Krishnan, Electric Motor & Drives: Modeling, Analysis and Control, Pearson, 2001.
REFERENCES:
1. Vedam Subramanyam, “ Electric Drives Concepts and Applications ”, 2e, McGraw Hill, 2016
2. Shaahin Felizadeh, “Electric Machines and Drives”, CRC Press (Taylor and Francis Group), 2013.
3. John Hindmarsh and Alasdain Renfrew, “Electrical Machines and Drives System,” Elsevier 2012.
4. Theodore Wildi, “ Electrical Machines ,Drives and power systems ,6th edition, Pearson Education ,2015
5. N.K. De., P.K. SEN” Electric drives” PHI, 2012.
2. Shaahin Felizadeh, “Electric Machines and Drives”, CRC Press (Taylor and Francis Group), 2013.
3. John Hindmarsh and Alasdain Renfrew, “Electrical Machines and Drives System,” Elsevier 2012.
4. Theodore Wildi, “ Electrical Machines ,Drives and power systems ,6th edition, Pearson Education ,2015
5. N.K. De., P.K. SEN” Electric drives” PHI, 2012.
Comments
Post a Comment