EE6501 - POWER SYSTEM ANALYSIS (Syllabus) 2013-regulation Anna University

EE6501 - POWER SYSTEM ANALYSIS (Syllabus) 2013-regulation Anna University

EE6501

POWER SYSTEM ANALYSIS

 LPTC

3003

OBJECTIVES:
• To model the power system under steady state operating condition.
• To apply numerical methods to solve the power flow problem.
• To model and analyze the system under faulted conditions.
• To model and analyze the transient behaviour of power system when it is subjected to a fault.

UNIT I

INTRODUCTION

9

Need for system planning and operational studies – basic components of a power system.-Introduction to restructuring - Single line diagram – per phase and per unit analysis – Generator - transformer – transmission line and load representation for different power system studies.- Primitive network - construction of Y-bus using inspection and singular transformation methods – z-bus.

UNIT II

POWER FLOW ANALYSIS

9

Importance of power flow analysis in planning and operation of power systems - statement of power flow problem - classification of buses - development of power flow model in complex variables form - iterative solution using Gauss-Seidel method - Q-limit check for voltage controlled buses – power flow model in polar form - iterative solution using Newton-Raphson method .


UNIT III

FAULT ANALYSIS – BALANCED FAULTS

9

Importance of short circuit analysis - assumptions in fault analysis - analysis using Thevenin’s theorem - Z-bus building algorithm - fault analysis using Z-bus – computations of short circuit capacity, post fault voltage and currents.

UNIT IV

FAULT ANALYSIS – UNBALANCED FAULTS

9

Introduction to symmetrical components – sequence impedances – sequence circuits of synchronous machine, transformer and transmission lines - sequence networks analysis of single line to ground, line to line and double line to ground faults using Thevenin’s theorem and Z-bus matrix.

UNIT V

STABILITY ANALYSIS

9

Importance of stability analysis in power system planning and operation - classification of power system stability - angle and voltage stability – Single Machine Infinite Bus (SMIB) system: Development of swing equation - equal area criterion - determination of critical clearing angle and time – solution of swing equation by modified Euler method and Runge-Kutta fourth order method.

TOTAL : 45 PERIODS

OUTCOMES:
• Ability to understand and analyze power system operation, stability, control and protection.

TEXT BOOKS:
1. Nagrath I.J. and Kothari D.P., ‘Modern Power System Analysis’, Tata McGraw-Hill, Fourth Edition, 2011.
2. John J. Grainger and W.D. Stevenson Jr., ‘Power System Analysis’, Tata McGraw-Hill, Sixth reprint, 2010.
3. P. Venkatesh, B.V. Manikandan, S. Charles Raja, A. Srinivasan, ‘ Electrical Power Systems- Analysis, Security and Deregulation’, PHI Learning Private Limited, New Delhi, 2012.

REFERENCES:
1. Hadi Saadat, ‘Power System Analysis’, Tata McGraw Hill Education Pvt. Ltd., New Delhi, 21st reprint, 2010.
2. Kundur P., ‘Power System Stability and Control, Tata McGraw Hill Education Pvt. Ltd., New Delhi, 10th reprint, 2010.
3. Pai M A, ‘Computer Techniques in Power System Analysis’, Tata Mc Graw-Hill Publishing Company Ltd., New Delhi, Second Edition, 2007.
4. J. Duncan Glover, Mulukutla S. Sarma, Thomas J. Overbye, ‘ Power System Analysis & Design’, Cengage Learning, Fifth Edition, 2012.
5. Olle. I. Elgerd, ‘Electric Energy Systems Theory – An Introduction’, Tata McGraw Hill Publishing Company Limited, New Delhi, Second Edition, 2012.
6. C.A.Gross, “Power System Analysis,” Wiley India, 2011.

Comments

Popular posts from this blog

CS3491 Syllabus - Artificial Intelligence And Machine Learning - 2021 Regulation Anna University

BE3251 - Basic Electrical and Electronics Engineering (Syllabus) 2021-regulation Anna University

CS3401 Syllabus - Algorithms - 2021 Regulation Anna University