EE6601 - SOLID STATE DRIVES (Syllabus) 2013-regulation Anna University

EE6601 - SOLID STATE DRIVES (Syllabus) 2013-regulation Anna University

EE6601

SOLID STATE DRIVES

 LPTC

3003

OBJECTIVES:
• To understand steady state operation and transient dynamics of a motor load system.
• To study and analyze the operation of the converter/chopper fed dc drive, both qualitatively and quantitatively.
• To study and understand the operation and performance of AC motor drives.
• To analyze and design the current and speed controllers for a closed loop solid state DC motor drive.

UNIT I

DRIVE CHARACTERISTICS

9

Electric drive – Equations governing motor load dynamics – steady state stability – multi quadrant Dynamics: acceleration, deceleration, starting & stopping – typical load torque characteristics – Selection of motor.

UNIT II

CONVERTER / CHOPPER FED DC MOTOR DRIVE

9

Steady state analysis of the single and three phase converter fed separately excited DC motor drive–continuous and discontinuous conduction– Time ratio and current limit control – 4 quadrant operation of converter / chopper fed drive.


UNIT III

INDUCTION MOTOR DRIVES

9

Stator voltage control–energy efficient drive–v/f control–constant airgap flux–field weakening mode – voltage / current fed inverter – closed loop control.

UNIT IV

SYNCHRONOUS MOTOR DRIVES

9

V/f control and self control of synchronous motor: Margin angle control and power factor control – permanent magnet synchronous motor.

UNIT V

DESIGN OF CONTROLLERS FOR DRIVES

9

Transfer function for DC motor / load and converter – closed loop control with Current and speed feedback–armature voltage control and field weakening mode – Design of controllers; current controller and speed controller- converter selection and characteristics.

TOTAL : 45 PERIODS

OUTCOMES:
• Ability to understand and apply basic science, circuit theory, Electro-magnetic field theory control theory and apply them to electrical engineering problems.

TEXT BOOKS:
1. Gopal K.Dubey, Fundamentals of Electrical Drives, Narosa Publishing House, 1992.
2. Bimal K.Bose. Modern Power Electronics and AC Drives, Pearson Education, 2002.
3. R.Krishnan, Electric Motor & Drives: Modeling, Analysis and Control, Prentice Hall of India, 2001.

REFERENCES:
1. John Hindmarsh and Alasdain Renfrew, “Electrical Machines and Drives System,” Elsevier 2012.
2. Shaahin Felizadeh, “Electric Machines and Drives”, CRC Press(Taylor and Francis Group), 2013.
3. S.K.Pillai, A First course on Electrical Drives, Wiley Eastern Limited, 1993.
4. S. Sivanagaraju, M. Balasubba Reddy, A. Mallikarjuna Prasad “Power semiconductor drives” PHI, 5th printing, 2013.
5. N.K.De., P.K.SEN”Electric drives” PHI, 2012.
6. Vedam Subramanyam, ”Thyristor Control of Electric Drives”, Tata McGraw Hill, 2007.

Comments

Popular posts from this blog

CS3491 Syllabus - Artificial Intelligence And Machine Learning - 2021 Regulation Anna University

BE3251 - Basic Electrical and Electronics Engineering (Syllabus) 2021-regulation Anna University

CS3401 Syllabus - Algorithms - 2021 Regulation Anna University