EI3351 Syllabus - Analog Electronics - 2021 Regulation Anna University

EI3351 Syllabus - Analog Electronics - 2021 Regulation Anna University

EI3351 ANALOG ELECTRONICS  LTPC
3003

COURSE OBJECTIVES:
• To understand the structure, operation and applications of electronic devices..
• To familiarize biasing of BJT & JFET devices..
• To explore the frequency response of amplifiers in various configurations.
• To learn the function of power amplifiers and negative feedback amplifiers..
• To design RC and LC tuned oscillators for a given frequency..

UNIT I PN JUNCTION DEVICES(8+1 SKILL) 9
PN junction diode – structure, operation and V-I characteristics, Transition and Diffusion capacitances – Rectifiers – Half Wave and Full Wave Rectifier with capacitor filter. Zener diode – reverse characteristics – Zener as voltage regulator, Display devices – LED, Laser diode, Photo diode.

UNIT II BJT AND SMALL SIGNAL AMPLIFIERS(8+1 SKILL) 9
BJT - structure, operation of NPN and PNP transistor, Input and output characteristics of CE, CB and CC configurations. DC Load Line and operating point, Need for biasing – Bias stabilization -Fixed and Voltage divider biasing. Single stage BJT amplifiers – AC analysis of CE and CC amplifier with Voltage divider bias using h-parameters - Gain and frequency response.


UNIT III FIELD EFFECT TRANSISTORS AND THYRISTORS(8+1 SKILL) 9
JFET, MOSFET - structure, operation and characteristics, JFET Biasing - self and voltage divider biasing. FET small signal model - Analysis of CS,CG and Source follower. Thyristor - SCR operation and characteristics, UJT - operation and characteristics.

UNIT IV DIFFERENTIAL AMPLIFIERS AND LARGE SIGNAL AMPLIFIERS(8+1 SKILL) 9
Cascade amplifier, BJT Differential amplifier – DC and AC analysis of common mode gain, differential mode gain and CMRR - Single tuned amplifier - construction, operation and frequency response. Power amplifiers – class A, class B and class C (Qualitative analysis only).

UNIT V FEEDBACK AMPLIFIERS AND OSCILLATORS(8+1 SKILL) 9
Feedback concepts, feedback topologies - voltage / current, series / shunt feedback - Transfer gain with feedback - effect of negative feedback on Riand Ro – Condition for oscillations, RC phase shift, Wien bridge, Hartley, Colpitts and Crystal oscillators.

TOTAL 45 PERIODS

SKILL DEVELOPMENT ACTIVITIES (Group Seminar/Mini Project/Assignment/Content Preparation / Quiz/ Surprise Test / Solving GATE questions/ etc) 5 PERIODS
1. Interpretation of Data Sheet of transistors and diodes with respect to their Static and Dynamic Characteristics.
2. Familiarization of any one relevant software tool (MATLAB/ SCILAB/ LABVIEW/ Proteus/ Equivalent open source software)
3. Design and verification of simple signal conditioning circuit thro simulation.
4. Realization of signal conditioning circuit in hardware
5. Introduction to other advanced logic circuits not covered in the above syllabus

COURSE OUTCOMES:
CO1 Explain the operation and characteristics of PN junction diode, Zener diode, LED and Laser diode. (L2)
CO2 Formulate the expression for voltage gain, current gain, input resistance and output resistance of a BJT CE and CC amplifier using h-parameter model. (L5)
CO3 Formulate the expression for voltage gain, input resistance and output resistance of FET amplifier under CS,CG and Source follower. (L5)
CO4 Explain the operation of cascade amplifier, differential amplifier, single tuned amplifier and power amplifiers. (L2)
CO5 Analyze the operation of negative feedback amplifiers and to design RC and LC tuned Oscillators for a given frequency range. (L4)

TEXT BOOKS:
1. Sedra and smith, “Microelectronic circuits”, 8th ed., Oxford University Press 2020.
2. S.Salivahanan,N.SureshKumar,“ElectronicDevicesandCircuits”,McGrawHillEducation(India)Pri vate Limited,4thEdition, 2017.
3. David A. Bell, “Electronic Devices and Circuits”, Oxford University press higher education, 5th Edition,2008.

REFERENCES:
1. Thomas L.Floyd, “Electronic devices” Conventional current version, Pearson prentice hall,10th Edition,2017.
2. RobertBoylestadandLouisNashelsky.,“ElectronDeviceandCircuitTheory”PrenticeHallPrivateLimited,11thedition, 2017.
3. Jacob Millman, Christos C Halkias, SatyabrataJit, ‘Electronic Devices and circuits’,McGraw Hill education, 4th edition, 2015.
4. BalbirKumar,Shail.B.Jain,“Electronicdevicesandcircuits”PHIlearningprivatelimited,2nd Edition2014.
5. SedhaR.S, “ATextBookofAppliedElectronics”, S.Chand & companyLtd.,Revisededition, 2013.

List of Open Source Software/ Learning website:
1. https://nptel.ac.in/courses/117101105.
2.https://www.google.com/urlsa=t&source=web&rct=j&url=https://picture.iczhiku.com/resource/eetop/WhkgDOyuhiJsYvMv.pdf&ved=2ahUKEwiLzOTqhuj4AhX_-TgGHefXBp0QFnoECAgQAQ&usg=AOvVaw0RFLaVzmh0NUl_3W3zqwzU
3. https://nptel.ac.in/courses/117106030
4. https://nptel.ac.in/courses/117102012
5. https://nptel.ac.in/courses/117106093
6. https://www.google.com/url?sa=t&source=web&rct=j&url=http://in.ncu.edu.tw/ncume_ee/harvar des154/lect_20_stability.pdf&ved=2ahUKEwjjnISXiOj4AhWqSWwGHRGkDxMQFnoECAMQA Q&usg=AOvVaw3YU37qK9qkYUf-ptaeD4D0
Previous
Next

Comments

Post a Comment

Popular posts from this blog

EC8094 - SATELLITE COMMUNICATION (Syllabus) 2017-regulation Anna University

EC8094 - SATELLITE COMMUNICATION (Syllabus) 2017-regulation Anna University EC8094 SATELLITE COMMUNICATION  LPTC 3003 OBJECTIVES: • Understand the basics of satellite orbits • Understand the satellite segment and earth segment • Analyze the various methods of satellite access • Understand the applications of satellites • Understand the basics of satellite Networks UNIT I SATELLITE ORBITS       9 Kepler‟s Laws, Newton‟s law, orbital parameters, orbital perturbations, station keeping, geo stationary and non Geo-stationary orbits – Look Angle Determination- Limits of visibility – eclipse-Sub satellite point –Sun transit outage-Launching Procedures - launch vehicles and propulsion. UNIT II SPACE SEGMENT       9 Spacecraft Technology- Structure, Primary power, Attitude and Orbit control, Thermal control and Propulsion, communication Payload and supporting subsystems, Telemetry, Tracking and
Read more

HS8581 - PROFESSIONAL COMMUNICATION (Syllabus) 2017-regulation Anna University

HS8581 - PROFESSIONAL COMMUNICATION (Syllabus) 2017-regulation Anna University HS8581 PROFESSIONAL COMMUNICATION  LPTC 3003 OBJECTIVES: The course aims to: • Enhance the Employability and Career Skills of students • Orient the students towards grooming as a professional • Make them Employability Graduates • Develop their confidence and help them attend interviews successfully. UNIT I Introduction to Soft Skills-- Hard skills & soft skills - employability and career Skills—Grooming as a professional with values—Time Management—General awareness of Current Affairs UNIT II Self-Introduction-organizing the material - Introducing oneself to the audience – introducing the topic – answering questions – individual presentation practice–– presenting the visuals effectively – 5 minute presentations UNIT III Introduction to Group
Read more

OML751 - TESTING OF MATERIALS (Syllabus) 2017-regulation - Open Elective | Anna University

OML751 - TESTING OF MATERIALS (Syllabus) 2017-regulation - Open Elective | Anna University OML751 TESTING OF MATERIALS  LPTC 3003 OBJECTIVE: To understand the various destructive and non destructive testing methods of materials and its industrial applications. UNIT I INTRODUCTION TO MATERIALS TESTING 9 Overview of materials, Classification of material testing, Purpose of testing, Selection of material, Development of testing, Testing organizations and its committee, Testing standards, Result Analysis, Advantages of testing. UNIT II MECHANICAL TESTING 9 Introduction to mechanical testing, Hardness test (Vickers, Brinell, Rockwell), Tensile test, Impact test (Izod, Charpy) - Principles, Techniques, Methods, Advantages and Limitations, Applications. Bend test, Shear test, Creep and Fatigue test - Principles, Techniques, Methods, Advantages and Limitations, Applications.
Read more