EI3451 Syllabus - Industrial Instrumentation - 2021 Regulation Anna University

EI3451 Syllabus - Industrial Instrumentation - 2021 Regulation Anna University

EI3451 INDUSTRIAL INSTRUMENTATION  LTPC
3003

COURSE OBJECTIVES:
• To introduce the measurement techniques of viscosity,humidity and moisture
• To introduce the measurement of temperature and pressure.
• To introduce the flow measurement techniques.
• To introduce the electrical flow measurement techniques.
• To introduce the level measurement techniques and transmitters.

UNIT I MEASUREMENT OF VISCOSITY, HUMIDITY AND MOISTURE 9
Viscosity: Saybolt viscometer - Rotameter type and Torque type viscometers. Humidity: Dry and wet bulb psychrometers – Resistive and capacitive type hygrometers – Dew cell – Commercial type dew meter. Moisture: Different methods of moisture measurements – Thermal, Conductivity and Capacitive sensors, Microwave, IR and NMR sensors, Application of moisture measurement - Moisture measurement in solids.

UNIT II TEMPERATURE & PRESSURE MEASUREMENT 9
Definitions and standards –Different types of filled in system thermometers – Bimetallic thermometers – IC sensors – Thermocouples, Signal conditioning for thermocouple, Commercial circuits for cold junction compensation,, Special techniques for measuring high temperature using thermocouple –- Radiation methods of temperature measurement – Total radiation pyrometers – Optical pyrometers – Fiber optic sensor for temperature measurement – Thermograph – Temperature sensor selection, Installation and Calibration, Manometers: Different types, Bourdon tube, Bellows, Diaphragms and Capsules, Pressure gauge selection, installation and calibration using dead weight tester.


UNIT III FLOW MEASUREMENT 9
Orifice plate: different types of orifice plates – Cd variation – pressure tapping– Venturi tube – Flow nozzle – Dall tube – Pitot tube, Installation and applications of head flowmeters, Positive displacement flow meters, Rotameter –theory, characteristics, installation and applications, Mass flow meter, Calibration of flow meters: – Dynamic weighing method.

UNIT IV ELECTRICAL TYPE FLOW METERS 9
Principle and constructional details of Electromagnetic flow meter – Ultrasonic flow meters – Laser Doppler anemometer – Vortex shedding flow meter – Target flow meter – Guidelines for selection of flow meter – Open channel flow measurement – Solid flow rate measurement.

UNIT V LEVEL MEASUREMENT AND TRANSMITTER 9
Level measurement: Float gauges - Displacer type, Ultrasonic gauge – Boiler drum level measurement :– Differential pressure method and Hydrastep method - Solid level measurement, Operation of Electronics and Smart transmitters – Principle of operation of flow, level, temperature and pressure transmitters.

TOTAL: 45 PERIODS

COURSE OUTCOMES:: Upon completion of the course, students will be able to
CO1 Understand Principles and working of Viscosity, Humidity, Moisture, temperature , pressure, flow and level measuring Instruments.(L2)
CO2 Calibrate temperature, flow , level and Pressure measuring devices .(L3)
CO3 Apply measurement of Viscosity, Humidity, Moisture, temperature , pressure, flow and level in Industrial Applications.(L3)
CO4 Select and install Industrial instruments for various applications (L4)
CO5 Understand various Electrical type Industrial Instruments (L2)

TEXT BOOKS:
1. Doebelin, E.O. and Manik, D.N., “Measurement systems Application and Design”, 6thMcGraw-Hill Education Pvt. Ltd,2011.
2. A.K. Sawhney and PuneetSawhney, “Mechanical Measurements and Instrumentation and Control”, DhanpatRai & Co. (P) Limited, 2015.

REFERENCES:
1. Liptak, B.G., “Instrumentation Engineers Handbook (Measurement)”, CRC Press,2005.
2. Patranabis, D., “Principles of Industrial Instrumentation”, 3rd Edition, McGraw-Hill Education,2017.
3. Eckman D.P., “Industrial Instrumentation”, Wiley Eastern Limited,1990.
4. Singh,S.K., “Industrial Instrumentation and Control”, Tata Mc-Graw-Hill Education Pvt. Ltd., New Delhi,2009.
Previous
Next

Comments

Post a Comment

Popular posts from this blog

EC8094 - SATELLITE COMMUNICATION (Syllabus) 2017-regulation Anna University

EC8094 - SATELLITE COMMUNICATION (Syllabus) 2017-regulation Anna University EC8094 SATELLITE COMMUNICATION  LPTC 3003 OBJECTIVES: • Understand the basics of satellite orbits • Understand the satellite segment and earth segment • Analyze the various methods of satellite access • Understand the applications of satellites • Understand the basics of satellite Networks UNIT I SATELLITE ORBITS       9 Kepler‟s Laws, Newton‟s law, orbital parameters, orbital perturbations, station keeping, geo stationary and non Geo-stationary orbits – Look Angle Determination- Limits of visibility – eclipse-Sub satellite point –Sun transit outage-Launching Procedures - launch vehicles and propulsion. UNIT II SPACE SEGMENT       9 Spacecraft Technology- Structure, Primary power, Attitude and Orbit control, Thermal control and Propulsion, communication Payload and supporting subsystems, Telemetry, Tracking and
Read more

HS8581 - PROFESSIONAL COMMUNICATION (Syllabus) 2017-regulation Anna University

HS8581 - PROFESSIONAL COMMUNICATION (Syllabus) 2017-regulation Anna University HS8581 PROFESSIONAL COMMUNICATION  LPTC 3003 OBJECTIVES: The course aims to: • Enhance the Employability and Career Skills of students • Orient the students towards grooming as a professional • Make them Employability Graduates • Develop their confidence and help them attend interviews successfully. UNIT I Introduction to Soft Skills-- Hard skills & soft skills - employability and career Skills—Grooming as a professional with values—Time Management—General awareness of Current Affairs UNIT II Self-Introduction-organizing the material - Introducing oneself to the audience – introducing the topic – answering questions – individual presentation practice–– presenting the visuals effectively – 5 minute presentations UNIT III Introduction to Group
Read more

OML751 - TESTING OF MATERIALS (Syllabus) 2017-regulation - Open Elective | Anna University

OML751 - TESTING OF MATERIALS (Syllabus) 2017-regulation - Open Elective | Anna University OML751 TESTING OF MATERIALS  LPTC 3003 OBJECTIVE: To understand the various destructive and non destructive testing methods of materials and its industrial applications. UNIT I INTRODUCTION TO MATERIALS TESTING 9 Overview of materials, Classification of material testing, Purpose of testing, Selection of material, Development of testing, Testing organizations and its committee, Testing standards, Result Analysis, Advantages of testing. UNIT II MECHANICAL TESTING 9 Introduction to mechanical testing, Hardness test (Vickers, Brinell, Rockwell), Tensile test, Impact test (Izod, Charpy) - Principles, Techniques, Methods, Advantages and Limitations, Applications. Bend test, Shear test, Creep and Fatigue test - Principles, Techniques, Methods, Advantages and Limitations, Applications.
Read more