ME3351 Syllabus - Engineering Mechanics - 2021 Regulation Anna University

ME3351 Syllabus - Engineering Mechanics - 2021 Regulation Anna University

ME3351 ENGINEERING MECHANICS  LTPC
3003

COURSE OBJECTIVES:
• To Learn the use scalar and vector analytical techniques for analysing forces in statically determinate structures
• To introduce the equilibrium of rigid bodies, vector methods and free body diagram
• To study and understand the distributed forces, surface, loading on beam and intensity.
• To learn the principles of friction, forces and to determine the apply the concepts of frictional forces at the contact surfaces of various engineering systems.
• To develop basic dynamics concepts – force, momentum, work and energy;

UNIT I STATICS OF PARTICLES 9
Fundamental Concepts and Principles, Systems of Units, Method of Problem Solutions, Statics of Particles - Forces in a Plane, Resultant of Forces, Resolution of a Force into Components, Rectangular Components of a Force, Unit Vectors. Equilibrium of a Particle- Newton’s First Law of Motion, Space and Free-Body Diagrams, Forces in Space, Equilibrium of a Particle in Space.

UNIT II EQUILIBRIUM OF RIGID BODIES 9
Principle of Transmissibility, Equivalent Forces, Vector Product of Two Vectors, Moment of a Force about a Point, Varignon’s Theorem, Rectangular Components of the Moment of a Force, Scalar Product of Two Vectors, Mixed Triple Product of Three Vectors, Moment of a Force about an Axis, Couple - Moment of a Couple, Equivalent Couples, Addition of Couples, Resolution of a Given Force into a Force -Couple system, Further Reduction of a System of Forces, Equilibrium in Two and Three Dimensions - Reactions at Supports and Connections.


UNIT III DISTRIBUTED FORCES 9
Centroids of lines and areas – symmetrical and unsymmetrical shapes, Determination of Centroids by Integration, Theorems of Pappus-Guldinus, Distributed Loads on Beams, Centre of Gravity of a Three- Dimensional Body, Centroid of a Volume, Composite Bodies, Determination of Centroids of Volumes by Integration. Moments of Inertia of Areas and Mass - Determination of the Moment of Inertia of an Area by Integration, Polar Moment of Inertia, Radius of Gyration of an Area, Parallel-Axis Theorem, Moments of Inertia of Composite Areas, Moments of Inertia of a Mass - Moments of Inertia of Thin Plates, Determination of the Moment of Inertia of a Three-Dimensional Body by Integration.

UNIT IV FRICTION 9
The Laws of Dry Friction, Coefficients of Friction, Angles of Friction, Wedge friction, Wheel Friction, Rolling Resistance, Ladder friction.

UNIT V DYNAMICS OF PARTICLES 9
Kinematics - Rectilinear Motion and Curvilinear Motion of Particles. Kinetics- Newton’s Second Law of Motion -Equations of Motions, Dynamic Equilibrium, Energy and Momentum Methods - Work of a Force, Kinetic Energy of a Particle, Principle of Work and Energy, Principle of Impulse and Momentum, Impact of bodies.

TOTAL: 45 PERIODS

COURSE OUTCOMES: At the end of the course the students would be able to
1. Illustrate the vector and scalar representation of forces and moments
2. Analyse the rigid body in equilibrium
3. Evaluate the properties of distributed forces
4. Determine the friction and the effects by the laws of friction
5. Calculate dynamic forces exerted in rigid body

TEXT BOOKS:
1. Beer Ferdinand P, Russel Johnston Jr., David F Mazurek, Philip J Cornwell, Sanjeev Sanghi, Vector Mechanics for Engineers: Statics and Dynamics, McGraw Higher Education., 12thEdition, 2019.
2. Vela Murali, “Engineering Mechanics-Statics and Dynamics”, Oxford University Press, 2018.

REFERENCES:
1. Boresi P and Schmidt J, Engineering Mechanics: Statics and Dynamics, 1/e, Cengage learning, 2008.
2. Hibbeller, R.C., Engineering Mechanics: Statics, and Engineering Mechanics: Dynamics, 13th edition, Prentice Hall, 2013.
3. Irving H. Shames, Krishna Mohana Rao G, Engineering Mechanics – Statics and Dynamics, 4thEdition, Pearson Education Asia Pvt. Ltd., 2005.
4. Meriam J L and Kraige L G, Engineering Mechanics: Statics and Engineering Mechanics: Dynamics, 7th edition, Wiley student edition, 2013.
5. Timoshenko S, Young D H, Rao J V and SukumarPati, Engineering Mechanics, 5thEdition, McGraw Hill Higher Education, 2013.
Previous
Next

Comments

Post a Comment

Popular posts from this blog

EC8094 - SATELLITE COMMUNICATION (Syllabus) 2017-regulation Anna University

EC8094 - SATELLITE COMMUNICATION (Syllabus) 2017-regulation Anna University EC8094 SATELLITE COMMUNICATION  LPTC 3003 OBJECTIVES: • Understand the basics of satellite orbits • Understand the satellite segment and earth segment • Analyze the various methods of satellite access • Understand the applications of satellites • Understand the basics of satellite Networks UNIT I SATELLITE ORBITS       9 Kepler‟s Laws, Newton‟s law, orbital parameters, orbital perturbations, station keeping, geo stationary and non Geo-stationary orbits – Look Angle Determination- Limits of visibility – eclipse-Sub satellite point –Sun transit outage-Launching Procedures - launch vehicles and propulsion. UNIT II SPACE SEGMENT       9 Spacecraft Technology- Structure, Primary power, Attitude and Orbit control, Thermal control and Propulsion, communication Payload and supporting subsystems, Telemetry, Tracking and
Read more

HS8581 - PROFESSIONAL COMMUNICATION (Syllabus) 2017-regulation Anna University

HS8581 - PROFESSIONAL COMMUNICATION (Syllabus) 2017-regulation Anna University HS8581 PROFESSIONAL COMMUNICATION  LPTC 3003 OBJECTIVES: The course aims to: • Enhance the Employability and Career Skills of students • Orient the students towards grooming as a professional • Make them Employability Graduates • Develop their confidence and help them attend interviews successfully. UNIT I Introduction to Soft Skills-- Hard skills & soft skills - employability and career Skills—Grooming as a professional with values—Time Management—General awareness of Current Affairs UNIT II Self-Introduction-organizing the material - Introducing oneself to the audience – introducing the topic – answering questions – individual presentation practice–– presenting the visuals effectively – 5 minute presentations UNIT III Introduction to Group
Read more

OML751 - TESTING OF MATERIALS (Syllabus) 2017-regulation - Open Elective | Anna University

OML751 - TESTING OF MATERIALS (Syllabus) 2017-regulation - Open Elective | Anna University OML751 TESTING OF MATERIALS  LPTC 3003 OBJECTIVE: To understand the various destructive and non destructive testing methods of materials and its industrial applications. UNIT I INTRODUCTION TO MATERIALS TESTING 9 Overview of materials, Classification of material testing, Purpose of testing, Selection of material, Development of testing, Testing organizations and its committee, Testing standards, Result Analysis, Advantages of testing. UNIT II MECHANICAL TESTING 9 Introduction to mechanical testing, Hardness test (Vickers, Brinell, Rockwell), Tensile test, Impact test (Izod, Charpy) - Principles, Techniques, Methods, Advantages and Limitations, Applications. Bend test, Shear test, Creep and Fatigue test - Principles, Techniques, Methods, Advantages and Limitations, Applications.
Read more