SF3403 Syllabus - Safety In Construction - 2021 Regulation Anna University

SF3403 Syllabus - Safety In Construction - 2021 Regulation Anna University

SF3403 SAFETY IN CONSTRUCTION  LTPC
3003

OBJECTIVES:
• know causes of accidents related to construction activities and human factors associated with these accident
• Understand the construction regulations and quality assurance in construction
• Have the knowledge in hazards of construction and their prevention methods
• know the working principles of various construction machinery
• gain knowledge in health hazards and safety in demolition work Course

UNIT I INTRODUCTION 9
Introduction to construction industry and safety issues in construction-Human factors in construction safety management- Roles of various groups and stake-holders in ensuring safety in construction industry -Framing of contract conditions onsafety and related matters –Relevance of ergonomics in construction safety

UNIT II SAFETY IN CONSTRUCTION OPERATIONS 9
Safety in various construction operations - Excavation and filling - Under- water works - Underpinning & Shoring - Ladders & Scaffolds - Tunnelling - Blasting - Dismantling - Confined spaceTemporary Structures. noise standards and limit values; noise instrumentation and monitoring procedure. Noise indices.Effects of air pollution in Industry, air pollution episodes ;Emission factors inventory and predictive equations. Familiarization with relevant Indian Standards and the National Building Code provisions on construction safety.


UNIT III CONSTRUCTION MACHINERY 9
Safety in material handling and equipment's-Safety in storage & stacking of construction materials. Safety in the use of construction equipment/vehicles - excavators, graders and dozers - cranes - hoists & lifts - other lifting gears˜ wire ropes - chain-pulley blocks - mixers -conveyors- pneumatic and hydraulic tools in construction. Safety in temporary power supply and fire safety at construction site.

UNIT IV CONSTRUCTION ACT AND CODE OF PRACTICES 9
Contract Labour (R&A) Act and Central Rules: Definitions, Registration of Establishments, Licensing of Contractors, Welfare and Health provisions in the Act and the Rules, Penalties, Rules regarding wages. Building & Other Construction Work (RE & CS) Act, 1996 and Central Rules, 1998: Applicability,Administration,Registration,WelfareBoard & WelfareFund,Training of Building workers, 79 General Safety, Health & Welfare provisions. Code of Practices - -Preventive measures against Hazards at work places Part1 & 2

UNIT V SAFETY IN DEMOLITION WORK 9
Safety in demolition work, manual, mechanical, using explosive - keys to safe demolition, pre survey inspection, method statement, site supervision ,safe clearance zone, health hazardsfrom demolition - Indian standard - trusses, girders and beams – first aid – fire hazards and preventing methods–Case studies in construction sites against the fire accidents

TOTAL:45 PERIODS

OUTCOMES: On completion of this course, the student will be able to
CO 1 Visualize the safety issues at different stages of construction activity.
CO 2 Understand the safety requirements in various construction operation sand develop guidelines to ensure safety at construction site.
CO 3 Understand the safety requirements in material handling and Equipments and develop guidelines to ensure safety at construction site.
CO 4 Learn the legal provisions with respect to the health and welfare of workers at construction site.
CO 5 List out construction regulations and Indian standards for construction and demolition work

TEXT BOOKS:
1. Hudson,R.,”ConstructionhazardandSafetyHandbook,ButterWorth’s,1985.
2. Raymond Elliot Levitt, Nancy Morse Samelson,“ConstructionSafetyManagement,McGrawHill,London,1987

REFERENCES:
1. Jnathea D.Sime,“Safety in the Build Environment”,London,1988.
2. Davies,V. J., and Tomasin,K.(1996).Construction safety hand book.Thomas Telford Publishing ,London.
3. Ratay,R.T.(1996).Handbook of temporary structures in construction(2ndedn.).McGrawHill,London.
4. Fulman,J.B.,ConstructionSafety,Security & Loss Prevention,John WileyandSons,1979.
5. Building and Other Construction Workers (Regulation of Employment and Conditions of Service) Act,1996 and Central Rules.
Previous
Next

Comments

Post a Comment

Popular posts from this blog

EC8094 - SATELLITE COMMUNICATION (Syllabus) 2017-regulation Anna University

EC8094 - SATELLITE COMMUNICATION (Syllabus) 2017-regulation Anna University EC8094 SATELLITE COMMUNICATION  LPTC 3003 OBJECTIVES: • Understand the basics of satellite orbits • Understand the satellite segment and earth segment • Analyze the various methods of satellite access • Understand the applications of satellites • Understand the basics of satellite Networks UNIT I SATELLITE ORBITS       9 Kepler‟s Laws, Newton‟s law, orbital parameters, orbital perturbations, station keeping, geo stationary and non Geo-stationary orbits – Look Angle Determination- Limits of visibility – eclipse-Sub satellite point –Sun transit outage-Launching Procedures - launch vehicles and propulsion. UNIT II SPACE SEGMENT       9 Spacecraft Technology- Structure, Primary power, Attitude and Orbit control, Thermal control and Propulsion, communication Payload and supporting subsystems, Telemetry, Tracking and
Read more

HS8581 - PROFESSIONAL COMMUNICATION (Syllabus) 2017-regulation Anna University

HS8581 - PROFESSIONAL COMMUNICATION (Syllabus) 2017-regulation Anna University HS8581 PROFESSIONAL COMMUNICATION  LPTC 3003 OBJECTIVES: The course aims to: • Enhance the Employability and Career Skills of students • Orient the students towards grooming as a professional • Make them Employability Graduates • Develop their confidence and help them attend interviews successfully. UNIT I Introduction to Soft Skills-- Hard skills & soft skills - employability and career Skills—Grooming as a professional with values—Time Management—General awareness of Current Affairs UNIT II Self-Introduction-organizing the material - Introducing oneself to the audience – introducing the topic – answering questions – individual presentation practice–– presenting the visuals effectively – 5 minute presentations UNIT III Introduction to Group
Read more

OML751 - TESTING OF MATERIALS (Syllabus) 2017-regulation - Open Elective | Anna University

OML751 - TESTING OF MATERIALS (Syllabus) 2017-regulation - Open Elective | Anna University OML751 TESTING OF MATERIALS  LPTC 3003 OBJECTIVE: To understand the various destructive and non destructive testing methods of materials and its industrial applications. UNIT I INTRODUCTION TO MATERIALS TESTING 9 Overview of materials, Classification of material testing, Purpose of testing, Selection of material, Development of testing, Testing organizations and its committee, Testing standards, Result Analysis, Advantages of testing. UNIT II MECHANICAL TESTING 9 Introduction to mechanical testing, Hardness test (Vickers, Brinell, Rockwell), Tensile test, Impact test (Izod, Charpy) - Principles, Techniques, Methods, Advantages and Limitations, Applications. Bend test, Shear test, Creep and Fatigue test - Principles, Techniques, Methods, Advantages and Limitations, Applications.
Read more