OSF351 Syllabus - Fire Safety Engineering - 2021 Regulation - Open Elective | Anna University

OSF351 Syllabus - Fire Safety Engineering - 2021 Regulation - Open Elective | Anna University

OSF351	FIRE SAFETY ENGINEERING	L T P C

3003

COURSE OBJECTIVES:

1: To enable the students to acquire knowledge of Fire and Safety Studies
2: To learn about the effect of fire on materials used for construction, the method of test for non- combustibility & fire resistance
3: To learn about fire area, fire stopped areas and different types of fire-resistant doors
4: To learn about the method of fire protection of structural members and their repair due to fire damage.
5: To develop safety professionals for both technical and management through systematic and quality-based study programmes

UNIT I	INHERENT SAFETY CONCEPTS	9

Compartment fire-factors controlling fire severity, ventilation controlled and fuel controlled fires; Spread of fire in rooms, within building and between buildings. Effect of temperature on the properties of structural materials- concrete, steel, masonry and wood; Behavior of non-structural materials on fire- plastics, glass, textile fibres and other house hold materials.

UNIT II	PLANT LOCATIONS	9

Compartment temperature-time response at pre-flashover and post flashover periods; Equivalence of fire severity of compartment fire and furnace fire; Fire resistance test on structural elements- standard heating condition, Indian standard test method, performance criteria.

UNIT III	WORKING CONDITIONS	9

Fire separation between building- principle of calculation of safe distance. Design principles of fire resistant walls and ceilings; Fire resistant screens- solid screens and water curtains; Local barriers; Fire stopped areas-in roof, in fire areas and in connecting structures; Fire doors- Low combustible, Non-combustible and Spark-proof doors; method of suspension of fire doors; Air-tight sealing of doors;

UNIT IV	FIRE SEVERITY AND REPAIR TECHNIQUES	9

Fabricated fire proof boards-calcium silicate, Gypsum, Vermiculite, and Perlite boards; Fire protection of structural elements - Wooden, Steel and RCC.. Reparability of fire damaged structures- Assessment of damage to concrete, steel, masonry and timber structures, Repair techniques- repair methods to reinforced concrete Columns, beams and slabs, Repair to steel structural members, Repair to masonry structures

UNIT V	WORKING AT HEIGHTS	9

Safe Access - Requirement for Safe Work Platforms- Stairways - Gangways and Ramps-Fall Prevention & Fall Protection - Safety Belts - Safety nets - Fall Arrestors- Working on Fragile Roofs - Work Permit Systems-Accident Case Studies.

TOTAL: 45 PERIODS

COURSE OUTCOMES: On completion of the course the student will be able to

CO1: Understand the effect of fire on materials used for construction
CO2: Understand the method of test for non-combustibility and fire resistance; and will be able to select different structural elements and their dimensions for a particular fire resistance rating of a building.
CO3: To understand the design concept of fire walls, fire screens, local barriers and fire doors and able to select them appropriately to prevent fire spread.
CO4: To decide the method of fire protection to RCC, steel, and wooden structural elements and their repair methods if damaged due to fire.
CO5: Describe the safety techniques and improve the analytical and intelligence to take the right decision at right time.

TEXT BOOKS:

• Roytman, M. Y,”Principles of fire safety standards for building construction”. Amerind Publishing Co. Pvt. Ltd., New Delhi,1975
• John A. Purkiss,”Fire safety engineering design of structures” (2nd edn.), Butterworth Heinemann, Oxford, UK,2009

REFERENCES:

1. Smith, E.E. and Harmathy, T.Z. (Editors),”Design of buildings for fire safety”. ASTM Special Publication 685, American Society for Testing and Materials, Boston, U.S.A,1979.
2. Butcher, E. G. and Parnell, A. C, ”Designing of fire safety”. JohnWiley and Sons Ltd., New York, U.S.A.1983.
3. Jain, V.K,”Fire safety in buildings” (2nd edn.). New Age International(P) Ltd., New Delhi,2010. 4. Hazop &Hazan,”Identifying and Assessing Process Industry Hazards”, Fourth Edition ,1999
4. Frank R. Spellman, Nancy E. Whiting,”The Handbook of Safety Engineering: Principles and Applications”, 2009.